22mm Speedfit

Plumbing Home | Speedfit 15mm & 22mm | 22mm Speedfit

Speedfit 15 & 22mm Pushfit Plumbing

John Guest 22mm push fit plumbing. This latest generation of Plastic Plumbing from the UK’s leading manufacturer conforms to Building Code BS7291 (Parts 1 & 3) and is approved by the Water Regulation Authority for use on both Hot & Cold Water Services, including sealed and open vented Central Heating Systems. Far easier to use than copper pipe and fittings, SPEEDFIT does not require a blowtorch to be used in confined spaces, does away with the risk of finding incomplete soldered joints when the water is turned on, and because the pipe is flexible, pipe runs can be installed through holes deep in the joists, rather than in notches immediately below the floor boards with their attendant risk of a carelessly placed nail. SPEEDFIT has distinct advantages over copper when delivering Hot Water. The inner blue surface is specially formulated to resist corrosion and lime scale. As the pipes are thermally efficient, they are safe to touch and heat is contained within the system until it is delivered to where you want it.

3M x 22mm SpeedFit Barrier Pipe

Ref: SFP23

Price: £5.99 (£7.04 Including VAT at 17.5%)

Quantity:

These 3M lengths of special barrier pipe are easily cut using the pipe cutters featured on this page. If you use other tools to cut the pipe then be sure not to damage the outside edge and remove all burrs.
People who bought this item also bought:

1. 22mm SpeedFit Equal Elbow (Ref: SFEE2)

2. 22mm SpeedFit Super Seal (Ref: SFSS2)

3. 15mm SpeedFit Pipe Clips (Ref: SFPC1)

25M x 22mm SpeedFit Barrier Pipe

Ref: SFP225

Price: £41.99 (£49.34 Including VAT at 17.5%)

Quantity:

These 25M lengths of special barrier pipe are easily cut using the pipe cutters featured on this page. If you use other tools to cut the pipe then be sure not to damage the outside edge and remove all burrs.

22mm SpeedFit Super Seal

Ref: SFSS2

Price: £0.29 (£0.34 Including VAT at 17.5%)

Quantity:

These Super Seal Inserts are designed to be fitted into the end of the Barrier Pipe to give the extra Seal when the fitted into any of the coupleing featured
People who bought this item also bought:

1. 15mm SpeedFit Pipe Clips (Ref: SFPC1)

2. 15mm SpeedFit Equal Elbow (Ref: SFEE1)

3. 22mm SpeedFit Equal Elbow (Ref: SFEE2)

22mm SpeedFit Straight Connector

Ref: SFSC2

Price: £1.49 (£1.75 Including VAT at 17.5%)

Quantity:

An inline straight connetor for joining 2 pieces of pipe.
People who bought this item also bought:

1. 22mm SpeedFit Super Seal (Ref: SFSS2)

2. 300mm SpeedFit Flexi Hose Tap Connector (Ref: SFTC13)

3. 15mm SpeedFit Super Seal (Ref: SFSS1)

22mm SpeedFit Equal Elbow

Ref: SFEE2

Price: £1.99 (£2.34 Including VAT at 17.5%)

Quantity:

A standard 90 degree bend,
People who bought this item also bought:

1. 3M x 22mm SpeedFit Barrier Pipe (Ref: SFP23)

2. 22mm SpeedFit Super Seal (Ref: SFSS2)

3. 15mm SpeedFit Pipe Clips (Ref: SFPC1)

22mm SpeedFit Equal Tee

Ref: SFET2

Price: £2.49 (£2.93 Including VAT at 17.5%)

Quantity:

A Standard Tee Piece for splitting the circuit

22mm SpeedFit Stop End

Ref: SFB2

Price: £1.59 (£1.87 Including VAT at 17.5%)

Quantity:

As the name suggests, an easy fitted blank cap

22mm 3/4" SpeedFit Straight Tap Connector

Ref: SFST2

Price: £2.99 (£3.51 Including VAT at 17.5%)

Quantity:

Designed to fit directly on to the base of your taps to allow simple connection. The connectors only require hand tightening when fitted.

22mm SpeedFit Stem Elbow

Ref: SFSE2

Price: £3.89 (£4.57 Including VAT at 17.5%)

Quantity:

Stem elbows are used to ad a bend to an existing straight run without having to remove the present fixings

22mm SpeedFit Tank Connector

Ref: SFTC2

Price: £2.19 (£2.57 Including VAT at 17.5%)

Quantity:

Exactly what it says. To allow barrier pipe to be connected to existing tanks.

22mm SpeedFit Pipe Clips

Ref: SFPC2

Price: £0.17 (£0.20 Including VAT at 17.5%)

Quantity:

Fix the pipe clips, lay your pipe in, then snap over the cap to hold it securly. Its as simple as that.
People who bought this item also bought:

1. 300mm SpeedFit Flexi Hose Tap Connector (Ref: SFTC13)

2. 22mm SpeedFit Super Seal (Ref: SFSS2)

3. 15mm SpeedFit Super Seal (Ref: SFSS1)

SpeedFit Pipe Clip Spacers

Ref: SFPCS

Price: £0.14 (£0.16 Including VAT at 17.5%)

Quantity:

These spacers are designed to simply fir in the back of the pipe clip. Some applications require the pipe to protrude from more. These spacers save you from having to fix blocks then attach the pipe clip.
People who bought this item also bought:

1. 500mm SpeedFit Flexi Hose Tap Connector (Ref: SFTC15)

2. 15mm SpeedFit Plastic Service Valve (Ref: SFSV1)

3. 22mm SpeedFit Super Seal (Ref: SFSS2)

300mm SpeedFit Flexi Hose Tap Connector

Ref: SFTC23

Price: £3.19 (£3.75 Including VAT at 17.5%)

Quantity:

These 300mm long fully flexible connectors come with a tap connector on one end and a speed fit connector on the other to enable fast and secure connections.

500mm SpeedFit Flexi Hose Tap Connector

Ref: SFTC25

Price: £4.99 (£5.86 Including VAT at 17.5%)

Quantity:

These 500mm long fully flexible connectors come with a tap connector on one end and a speed fit connector on the other to enable fast and secure connections.

300mm SpeedFit Flexi Hose Double Push Fit

Ref: SFPB23

Price: £4.49 (£5.28 Including VAT at 17.5%)

Quantity:

These 300mm long fully flexible connectors come with a speed fit connector on both ends. This alloes for fast and secure connections on systems where the pipe do not meet.
People who bought this item also bought:

1. 22mm SpeedFit Push fit Reducer (Ref: SFR21)

500mm SpeedFit Flexi Hose Double Push Fit

Ref: SFPB25

Price: £6.29 (£7.39 Including VAT at 17.5%)

Quantity:

These 500mm long fully flexible connectors come with a speed fit connector on both ends. This alloes for fast and secure connections on systems where the pipe do not meet.

SpeedFit Reducing Straight Coupler

Ref: SFRC

Price: £2.69 (£3.16 Including VAT at 17.5%)

Quantity:

A straight coupler with a 15mm push fit one end and a 22mm push fit the other end.
People who bought this item also bought:

1. 15mm SpeedFit Plastic Service Valve (Ref: SFSV1)

2. 15mm 1/2" SpeedFit Straight Tap Connector (Ref: SFST1)

3. 22mm SpeedFit Super Seal (Ref: SFSS2)

22mm SpeedFit Push fit Reducer

Ref: SFR21

Price: £1.49 (£1.75 Including VAT at 17.5%)

Quantity:

A 15mm push fit on one end and a 22mm pipe on the other.
People who bought this item also bought:

1. 500mm SpeedFit Flexi Hose Tap Connector (Ref: SFTC15)

2. 15mm SpeedFit Plastic Service Valve (Ref: SFSV1)

3. 22mm SpeedFit Super Seal (Ref: SFSS2)